EPHA Hose Protectors are tough, abrasion-resistant shields that withstand solvents, oils, grease, and gasoline. With a high wear factor and a wide operating temperature range (-40° to 430°F), they safeguard equipment in harsh conditions.
| Protector Size (W x L) | Box Includes | Zip Tie Length x Tensile Strength |
| 2.5" x 4" | 20 Hose Protectors w/ ties | 8" x 50lb |
| 3.25" x 6" | 20 Hose Protectors w/ ties | 12" x 50lb |
| 3.5" x 8" | 20 Hose Protectors w/ ties | 12" x 50lb |
Protects Against
• Hose and wiring abrasion caused by points of contact
• Expensive hose and wiring repair bills
• Fires caused by failed oil & electrical systems
• Lost profits from costly down time
• DEQ oil spills & clean-up
Product Features
• Extremely high wear factor
• Wide operating temperature range (-40˚ to 430˚ F) provides protection in a variety of applications
• Impervious to solvents, oils, grease, gasoline, etc.
• Easy installation in minutes
• Exceptionally cost-effective
• 20 of each size 4", 6" and 8"
• Every order shipped in counter display boxes
Installing an EPHA Hose Protector is a quick and effective way to shield hoses from abrasion, whether during assembly or replacement. There's no need to disassemble lines or disrupt hydraulic systems, making it a versatile solution for spot applications.
- Identify the problem area on the hose.
- Position the Hose Protector over the affected section.
- Secure with cable ties, tightening them with pliers.
- Trim the excess tie length—your hose is now protected from wear!
